Edirol Installing the UA-20 driver OMS, Dialog box will indicate Installation completed

Getting Connected and Installing Drivers (Macintosh)

■Installing the UA-20 driver (OMS)

Use the following procedure to install the UA-20 driver. The included UA-20 OMS driver is an add-on module for using the UA-20 with OMS. In order for you to use it, OMS

must already be installed on the hard disk from which you started up.

If you would like to learn more about OMS, refer to OMS_2.3_Mac.pdf in the OMS Driver folder within the Driver E folder of the CD-ROM. You will need the Adobe Acrobat Reader in order to view OMS_2.3_Mac.pdf.

*Disconnect the UA-20 from the Macintosh before you perform the installation.

1

Exit all currently running software (applications).

If you are using a virus checker or similar software, be sure to exit this as well.

2

Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive.

3

Double-click the UA-20 OMS Driver-E Installer icon (found in the Driver E–OMS Driver folder of the CD-ROM) to start up the installer.

4

Verify the Install Location, and click [Install].

5

If a message like the following is displayed, click [Continue].

The other currently

running applications will exit, and installation will continue.

6

A dialog box will indicate Installation completed.

Click [Restart] to restart your Macintosh.

OMS can be found in the OMS Driver folder within the Driver E folder of the CD-ROM.

The indication for the installation location will differ depending on your system. Make sure that the startup disk for the system you are using is selected.

44