Edirol UA-20 owner manual Using Asio Direct Monitor, Make the following settings

UA-20 application guide

Using ASIO Direct Monitor

If you are using the UA-20 from an ASIO2.0-compatible application in Advanced mode, the UA-20’s Input monitor switch can be controlled automatically from the application.

1

As described in “Opening the special driver settings dialog box (p. 65)”, open the “Driver Settings” dialog box.

2

Make the following settings.

Check the “Use ASIO Direct Monitor” check box.

3

Click [OK] to close the driver settings dialog box.

*Depending on your application, there may also be an ASIO Direct Monitor setting among the audio settings of your application. For details, refer to the operation manual for your application.

*When using ASIO Direct Monitor, monitoring may switch on/off at unexpected times, depending on the application settings and on the recording procedure. If this occurs, uncheck the check box in step 2 to disable ASIO Direct Monitor.

64