Edirol UA-20 Advance mode select switch, On Advanced mode, Off Standard Driver mode, Input jacks

Names of things and what they do

9.ADVANCE (mode select) switch

This switches the operating mode.

On (Advanced mode)

The driver included with the UA-20 will be used to record/play/edit audio on sequencer software or waveform editing software with high audio quality and stable timing. Using the dedicated driver provided on the included CD-ROM, you will be able to record, play, and edit audio on your sequencer or waveform editing application with high quality and stable timing. Normally, you should use this.

Off (Standard Driver mode)

Select this mode when using applications that use the audio driver included with your operating system, and utilize functionality specific to your operating system.

10.Input monitor switch

This selects whether or not the signal input to the input jacks will be output to the headphone jack and the master output jacks.

ON	The input signal from the Input jacks will be output to
	the Headphone jack and the Master output jacks.
AUTO	Settings or operations in an ASIO 2.0 compatible applica-
	tion such as Cubase will be able to control the monitoring
	setting.
OFF	The input signal from the Input jacks will not be output
	to the Headphone jack or the Master output jacks.

11.Input select switch

Set this as appropriate for the device that is connected to the input jacks.

LINE	When connecting an audio source or MIDI sound module
	via an analog audio connection
GUITAR	When connecting a guitar
MIC	When connecting a dynamic mic
	* The miniature mics (condenser mics) included with
	some computers or sound cards are not supported.

12.Input jacks

These are input jacks for analog audio signals. You can connect dynamic mics, guitars, or audio devices. You must set the Input select switch to the position appropriate for the device you have connected.

If you connect a guitar or mic only to the L jack or R jack, the signal will be monaural.

14