Edirol UA-20 owner manual Installing the special driver, Windows XP/2000 users

Getting Connected and Installing Drivers (Windows)

Switching between Advanced mode and Standard driver mode

If you first install both the special driver and the standard driver, you will be able to switch between Advance and Standard driver modes by operating the UA-20's ADVANCE (mode select) switch.

*In order for the setting of the ADVANCE (mode select) switch to take effect, you must exit all sequencer software and other applications that use the UA-20, and re-connect the UA-20.

Installing the special driver

The installation procedure will differ depending on your system.

Please proceed to one of the following sections, depending on the system you use.

•Windows XP/2000 users .................................(p. 17)

•Windows Me/98 users.....................................(p. 29)

■Windows XP/2000 users

The CD-ROMcontains two types of driver for Windows XP/2000.

Normally, you should use the WDM driver.

WDM driver

You should use this driver if you have specified WDM driver mode for SONAR or a similar application. This will provide the highest-quality audio performance.

*It is not possible to use 24-bit audio with applications that do not support a WDM driver mode, such as Cool Edit or Media Player.

MME driver

This driver allows you to use 24-bit audio even from applications that do not have a WDM driver mode, such as Cool Edit. It is not possible to use the MME driver from WDM driver mode of an application such as SONAR.

*It is not possible to install both the WDM driver and the MME driver. You must select one beforehand, and install only that driver. If after installing one of these drivers you decide to change drivers, you must first delete the already-installed driver and then install the new driver. (➝ Deleting the special driver (p. 79))

*The WDM driver and the MME driver can be installed using the same procedure.

English

Deutsch

Français

Italiano

Español

17