PLAYBACK
SETTING THE TOP PRIORITY PLAYBACK LAYER (SACD ONLY)
The factory default setting for the top priority playback of the SACD disc layer is the SACD (stereo) layer. The user can change the SACD disc layer for top priority playback after the disc is loaded.
CD 303T SACD SUPER AUDIO CD PLAYER
Professional Version
DIGITAL | ANALOG |
|
|
|
|
|
|
OUTPUT | OUTPUT | TUBE | 2CH/MULTI CH | CD/SACD | USB | COAXIAL | TOSLINK |
OUTPUT | |||||||
POWER |
|
| OPEN/CLOSE | PLAY | STOP | PREV. | NEXT |
1 | 3 |
1.Press the POWER button to turn the power on.
2.Check that the disc is loaded.
3.Press the 2CH/MULTI CHANNEL button and switch to the desired layer.
•When an SACD disc is loaded after the setting has been made, the contents recorded on the set layer are displayed.
•If a disc not containing the layer set for top priority playback is loaded, the contents recorded on another layer are displayed automatically.
•This setting is stored in the memory and is not cleared, even when the disc holder is opened or closed or the power is turned off. To change the setting, repeat the procedure above.
18
