Cary Audio Design CD 303T SACD specifications Digital To Analog Converter

DIGITAL TO ANALOG CONVERTER

USING AS A DIGITAL TO ANALOG (D/A) CONVERTER

CD 303T SACD SUPER AUDIO CD PLAYER

Professional Version

DIGITAL	ANALOG
OUTPUT	OUTPUT	TUBE
SAMPLE-RATE CONVERTER		OUTPUT	2CH/MULTI CH	CD/SACD	USB	COAXIAL	TOSLINK
POWER			OPEN/CLOSE	PLAY	STOP	PREV.	NEXT

1 2

1.Press the POWER button to turn the power on.

2.Press the desired digital input button: USB, COAXIAL, or TOSLINK button.

3.At startup, the USB / COAXIAL / TOSLINK displays the following:

•A-OUT: NONE

•D-IN: NONE

•D-OUT: NONE

After initializing, the Analog-Out is the first to appear on the display, then the external digital input sampling frequency appears. The USB / COAXIAL / TOSLINK displays will show as follows:

•A-OUT: 192 kHz

•D-IN: 192 kHz

•D-OUT: 192 kHz

•Digital input signal can be output in digital format and analog format.

•Only linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz,

88.2kHz, 176.4 kHz or 192 kHz can be played on this setting. Do not input any digital signal other than linear pulse code modulation (PCM) signals such as CD- ROM, Dolby Digital, and DTS signals. Doing so will generate output noise that could damage the speakers.

•When the digital sampling frequency is switched, the muting circuit is activated for 1 or 2 seconds, so the sound will stop momentarily and then start again each time the digital sample rate is changed.

19