AUTO SOUND SETUP
29
6. When the speaker check ends, the following VFD appears on the display.
Total: 8 speakers (or however many speakers are connected)
Press ENTER now
The results of the speaker check will be displayed. The front panel shows confirmation of
the number of speakers detected. If some speakers are not detected, make sure that
they are all connected properly. After confirming the total number of speakers, press the
ENTER button.
7. Set Distance
During Set Distance testing, the following VFD appears on the display and checks are
made to detect dart sound in the listening room (whether there are speakers connected
to each channel or not) and the polarity of the speakers as they are connected.
Set Distance
FL.......................... 0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
CEN .......................0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
FR..........................0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
SR .........................0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
SBR........................0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
SBL........................ 0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
SL..........................0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
SW.........................0.0ft 0.00m (0.0ft to 100ft/ 0.00m to 30.3m)
8. Set Balance
During Set Balance testing, the following VFD appears on the display and checks are
made to detect the test sound in the listening room (whether there are speakers
connected to each channel or not) and the polarity of the speakers as they are
connected.
Set Balance
FL.................................. 0.0dB -15.0dB to + 15.0dB
CEN ............................... 0.0dB -15.0dB to + 15.0dB
FR.................................. 0.0dB -15.0dB to + 15.0dB
SR ................................. 0.0dB -15.0dB to + 15.0dB
SBR................................ 0.0dB -15.0dB to + 15.0dB
SBL................................ 0.0dB -15.0dB to + 15.0dB
SL.................................. 0.0dB -15.0dB to + 15.0dB
SW................................. 0.0dB -15.0dB to + 15.0dB
9. Set Room EQ
During Set Room EQ testing, the following VFD appears on the display and checks are
made to detect the test sound in the listening room (whether there are speakers
connected to each channel or not) and the polarity of the speakers as they are
connected.
Set Room EQ
FL............................. Set / N/A -15.0dB to + 15.0dB
CEN .......................... Set / N/A -15.0dB to + 15.0dB
FR............................. Set / N/A -15.0dB to + 15.0dB
SR ............................ Set / N/A -15.0dB to + 15.0dB