SETUP MENU
37
SET SPEAKER PHASE (FOR BETTER SOUNDS) The Cinema 11a 's SET SPEAKER PHASE feature uses phase correction measures to make sure
your sound source arrives at the listening position in phase, preventing unwanted distortion
and/or coloring of the sound.
SET SPEAKER PHASE technology provides coherent sound reproduction through the use of phase
matching for an optimal sound image at your listening position.
Setting the speaker phase manually
If you have already completed the Auto Sound SETUP, press ENTER to return to the SETUP
MENU. If you want to adjust your settings manually, you can use the SET SPEAKER PHASE menu
option, following the directions below.
NOTE: The following selected menus appear on the Cinema 11a Display.
MOVIE SPK Setting
Set Speaker Phase
To set the Speaker Phase manually:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / LISTENING PROFILES appears.
2. Press the ENTER button to enter the LISTENING PROFILES setup menu.
3. Press the button until SET SPEAKER PHASE is selected.
The MOVIE SPK Setting/Set Speaker Phase menu appears.
4. Press the ENTER button to enter the SET SPEAKER PHASE setup menu.
5. Use the and buttons to adjust the phase.
You can adjust each channel’s speaker to be in phase or out phase.
6. Press the button to select BACK and press the ENTER to return to the SETUP MENU,
or press the SETUP button to exit the SETUP MENU.
This menu is for matching the output of connected audio devices and the input jacks of this
Surround Sound Processor.
- Assigned Inputs
- Change input names
- Set Analog in level
- Set Analog in config
- Set HDMI in Audio