Cary Audio Design Cinema 11a

AUTO SOUND SETUP

SBR........................... Set / N/A -15.0dB to + 15.0dB

SBL........................... Set / N/A -15.0dB to + 15.0dB

SL............................. Set / N/A -15.0dB to + 15.0dB

SW............................ Set / N/A -15.0dB to + 15.0dB

10. Set Crossover Points

During Set Crossover Points testing, the following VFD appears on the display and checks

are made to detect the test sound in the listening room (whether there are speakers

connected to each channel or not) and the polarity of the speakers as they are

connected.

Set Crossover Points

FL........ Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

CEN .....Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

FR........ Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

SR ....... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

SBR...... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

SBL...... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

SL........ Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

SW....... Full Full, 40Hz, 40Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz

11. Set Speaker Phase

During Set Speaker Phase testing, the following VFD appears on the display and checks

are made to detect the test sound in the listening room (whether there are speakers

connected to each channel or not) and the polarity of the speakers as they are

connected.

Set Speaker Phase

FL............................... Inphase Inphase / Outphase

CEN ............................ Inphase Inphase / Outphase

FR...............................Inphase Inphase / Outphase

SR ..............................Inphase Inphase / Outphase

SBR.............................Inphase Inphase / Outphase

SBL............................. Inphase Inphase / Outphase

SL............................... Inphase Inphase / Outphase

SW..............................Inphase Inphase / Outphase

Storing Measurement Results in SETUP MENU

If the Cinema 11a senses that a speaker is out of phase, the VFD will show the following

sentence:

Out PHASE SPK

___ ___ ___

The Cinema 11a can automatically adjust the speakers listed as Out of Phase to being

properly in phase and will go to the next step.

- Press ENTER restore to Setup Menu

Press the ENTER button to store all parameters including the equalizer parameters in the

SETUP MENU. If you do not want to store the calculation results in the SETUP MENU,

press the TEST button to exit.