REMOVE SHIPPING BLOCKS
Step 10. On the flywheel remove the five shipping blocks by unscrewing the screws. Set these screws aside for installing the blades in Step 11.
Discard the five shipping blocks.
Shipping
Blocks
BLADE/BLADE HOLDER INSTALLATION
Step 11. Using the five screws removed in Step 10, and the five additional screws from the pack, attach each blade/blade holder assembly to the motor.
Using the screwdriver, tighten securely by hand only.
REMOVE SWITCH HOUSING CAP SCREWS
Step 12. Remove the two screws of the switch housing cap.
Set the cap and screws aside for use in Step 15.
8 | 4743040 AT0907 |
|
|
