Casablanca Fan Company 54005, 54007, 54006 Remove the pre-installed Hand tighten the downrod at

Models: 54006 54005 54007

1 17

Page 8

www.CasablancaFanCo.com

1.888.227.2178

Remove the pre-installed	Hand tighten the downrod (at	The wires can be cut, but	Tighten the setscrew
setscrew so that the downrod	least 4-5 full turns) until it stops.	leave at least 8” extending	with pliers. DO NOT
can be inserted.		from the top of the downrod.	HAND TIGHTEN.

8”

3/8”

If the setscrew is not tightened securely, the fan may fall.

Image 8

Contents

Table of Contents What to Expect with Your Installation Tools Needed Standard Support Mounting Structure CeilingOutlet Box Angled For angled ceilings, point Opening toward peak Ceiling Bracket InstallationMake sure all four 4 bumpers Are still attached Ceiling Bracket Installation Preparation Remove the shipping blocks from Downrod Remove the pre-installed Hand tighten the downrod at Tighten the setscrewSetscrew so that the downrod Leave at least 8 extending Put the wires and downrod through Fan Wiring Canopy Insert the two canopy screws Found Hardware bag Blades You kept after removing Switch Housing Feed the wire plug through the center Light Kit Socket Shade Socket Ring Socket Ring Tool Hardware bag With bulbs of same wattage Insert three 3 switchHousing screws found Maintenance & Cleaning Troubleshooting Fan doesn’t work