Tools Needed | Casablanca Fan Company 54007, 54006, 54005 specs

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers

Wire Strippers

Screwdrivers

Power Drill

(optional)

9/64” Drill Bit

(optional)

If mounting to a support structure, you will also need these tools.

3

M6004-01 • 08/13/12 • © Casablanca Fan Company

Image 3

Casablanca Fan Company 54007, 54006, 54005 operation manual Tools Needed

Contents

Table of Contents What to Expect with Your Installation Tools Needed Angled Standard Support Mounting StructureCeiling Outlet Box Ceiling Bracket Installation Make sure all four 4 bumpers Are still attachedFor angled ceilings, point Opening toward peak Remove the shipping blocks from Ceiling Bracket Installation Preparation Downrod Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrod Fan Put the wires and downrod through Wiring Insert the two canopy screws Found Hardware bag Canopy You kept after removing Blades Feed the wire plug through the center Switch Housing Socket Shade Socket Ring Socket Ring Tool Light Kit Insert three 3 switch Housing screws foundHardware bag With bulbs of same wattage Maintenance & Cleaning Fan doesn’t work Troubleshooting