Maintenance & Cleaning

www.CasablancaFanCo.com 1.888.227.2178

The pull chain controls the fan: high,

medium, low, extra low, and off. The light pull chain controls the

power to the light fixture: on and off.

Reverse

Switch

To switch the direction of air

flow, move the reverse switch to

the opposite position.

For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

Image 16

Contents

Table of Contents What to Expect with Your Installation Tools Needed Standard Support Mounting Structure CeilingOutlet Box Angled Make sure all four 4 bumpers Are still attached Ceiling Bracket InstallationFor angled ceilings, point Opening toward peak Ceiling Bracket Installation Preparation Remove the shipping blocks from Downrod Remove the pre-installed Hand tighten the downrod at Tighten the setscrewSetscrew so that the downrod Leave at least 8 extending Put the wires and downrod through Fan Wiring Canopy Insert the two canopy screws Found Hardware bag Blades You kept after removing Switch Housing Feed the wire plug through the center Light Kit Socket Shade Socket Ring Socket Ring Tool Housing screws found Insert three 3 switchHardware bag With bulbs of same wattage Maintenance & Cleaning Troubleshooting Fan doesn’t work