Manuals / Casablanca Fan Company / Household Appliance / Fan

Casablanca Fan Company 55052 Downrod continued, 3/8”, The wires can be cut, but, can be inserted

Models: 55052

1 22

Page 8

Downrod (continued)

E
K	E
	P
		!

www.CasablancaFanCo.com

1.888.227.2178

Remove the pre-installed	Hand tighten the downrod (at	The wires can be cut, but	Tighten the setscrew
setscrew so that the downrod	least 4-5 full turns) until it stops.	leave at least 8” extending	with pliers. DO NOT
can be inserted.		from the top of the downrod.	HAND TIGHTEN.

8”

3/8”

If the setscrew is not tightened securely, the fan may fall.

Page 8

Image 8

Casablanca Fan Company 55052 Downrod continued, 3/8”, The wires can be cut, but, Tighten the setscrew, with pliers. DO NOT

Contents

Table of Contents TroubleshootingWhat to Expect with Your Installation 1 Standard Downrod2 Shorter Downrod 3 Longer DownrodTools Needed Wire StrippersPower Drill optional LadderOPTION FOLDPLACE SLIDECeiling Bracket Make sure all four bumpers areIf you are unable to do this still attachedPreparation Downrod OptionSteps 1-5 to remove standard downrod pipe Steps 6-10 to reassemble with new pipeDownrod continued The wires can be cut, but3/8” Tighten the setscrewCANOPY OR WIRES. Place the downrod Downrod continuedDO NOT PICK THE FAN UP BY THE Let the canopy sit loosely on top of the fanWiring Wiring continued Wall Control Canopy HolesScrew M8522-01 04/16/15 2014-2015 Casablanca Fan CompanyBlades Switch Housing Want to install your fan without a light kit? Light KitSocket Ring Tool Socket Ring Shade Socket M8522-01 04/16/15 2014-2015 Casablanca Fan Company Light Kit continuedSee next page for fan operation instructions to the receiver and ready to use OperationThe remote transmitter is already paired Fan Speed Lights Down Reverse Battery Holder Lights Up b Fan PowerOperation continued Reverse ButtonMaintenance & Cleaning M8522-01 04/16/15 2014-2015 Casablanca Fan CompanyTroubleshooting AUTHORIZED SERVICE CENTERSLights dim when turned on or do not turn on at all Fan doesn’t workTroubleshooting continued Installing Multiple Fans with Independently Operating Remote ControlsInstalling Multiple Fans Operating on a Single Remote Control Installing One Fan Operating on Multiple Remote Controls

Downrod (continued)

The wires can be cut, but

Tighten the setscrew

least 4-5 full turns) until it stops.

with pliers. DO NOT

can be inserted.

HAND TIGHTEN.

3/8”