NetBAY Power Distribution Units 169
Figure 79. Installing the vertical mounting plate and cable-management bracket
5. Install the cable-management bracket 1 beside the vertical mounting plate with
four M6 screws and nuts tha t com e with this option.
Proceed to “Cabling your PDUs” on page 173 for instructions on how to cable
your Rack PDU.
Installing a single device ho rizontally
Use the following procedure to mount a single Rack PDU horizontally in your rack
cabinet:
1. Refer to the documentation that comes with your rack cabinet for additional
information.
Notes:
a. Removing the rack doors and side panels might make your Rack PDU
installation easier.
b. Use clip nuts for rack cabinets with round holes; use cage nuts for ra ck
cabinets with square holes.
Cage
nuts
Cage
nuts
Clip
nuts