IBM 42S, 9TX, 9TS, 9QX, 9QS, 900, 4SB, 4SA, 42P, 42X, 200, 42E, 4QS, 4QX manual Resetting the selector switch

Device Settings

Port Monitor

1SVGA

2SVGA

38515

4SVGA

5Default

6Default

7Default

88port

4.To assign a monitor type, highlight the port you want and use the + or - keys to select the value that corresponds to the particular monitor.

To assign a secondary selector switch to a port, highlight the port and use the + or

-keys to obtain the appropriate port value.

5.Press the Enter key to save the settings. Press Esc at any time before pressing Enter to cancel the operation.

6.Press Esc to remove the Advanced Menu from the screen.

Resetting the selector switch

The selector switch can be reset by depressing the Reset button on the back panel of the selector switch.

Note: Pressing the reset button might recover the device settings without having to power-off, then power-on all the servers.

Type 9306 Model 200 45