NetBAY3E enclosure

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Casters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Front cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Device side rails . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Stacking NetBAY3E enclosures . . . . . . . . . . . . . . 126 Parts listing (NetBAY3E) . . . . . . . . . . . . . . . . . . . . 127

Features

The IBM NetBAY3E enclosure provides a convenient 3-U high by 28-inch deep storage cabinet for the installation of computer devices.

Note: Vertical measurements are given in rack units (U). One U is equal to 4.45 cm (1.75-inches).

Up to three NetBAY3E enclosures can be stacked under certain IBM servers. Devices such as the IBM EXP10, an uninterruptable power supply (UPS), or various telecommunications equipment can also be installed in a NetBAY3E enclosure.

Important:

The maximum server weight is 77 kg (170 lb.).

Refer to the latest IBM Server Hardware Maintenance Manual when servicing the server.

Assure all power and signal cables are routed properly and are not pinched.

Make sure NetBAY3E enclosures in a stack are securely fastened together.

Make sure empty NetBAY3E enclosures (no devices installed) have the rear cover securely attached.

Servers are lifted onto and off of the NetBAY3E enclosure. Make sure you have help when lifting.

Locations

The following sections contain information on specific equipment locations.

© Copyright IBM Corp. 2001

123

Page 131
Image 131
IBM 4SB, 9TX, 9TS, 9QX, 9QS, 900, 4SA, 42P, 42X, 200, 42E, 42S, 4QS, 4QX manual NetBAY3E enclosure