174 Hardware Maintenance Manual: IBM PC Server/En terprise Racks
Statement 1
DANGER
Statement 5
CAUTION:
The power control button on the device and the power switch on the power supply
do not turn off the electrical current supplied to the device. The device also might
To con nect :
1. Turn everything OFF.
2. First, attach all ca bles to devices.
3. Attach signal c ables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. First , remove power cords from outlet .
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Electrical current from power, telephone, and communication cables is
hazardous. To avoid a shock hazard:
•Do not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical
storm.
•Connect all power cords to a properly wired and grounded electrical
outlet.
•Connect to properly wired outlets any equipment that will be attached to
this product.
•When possible, use one hand only to connect or disconnect signal cables.
•Never turn on any equipment when there is evidence of fire, water, or
structural damage.
•Disconnect the attached power cords, telecommunicat i ons systems,
networks, and modems bef ore you open the device cov ers, unless
instructed otherwise in the installation and configuration procedures.
•Connect and disconnect ca bles as described in the f ollowing table when
installing, moving, or opening covers on this product or attached devices.