1.Unplug the flat panel monitor and disconnect the power cord from the flat panel monitor power supply.
2.Carefully use a
Figure 27. Removing the cable cover, hinge cover, and stand cover
3.Squeeze the sides of the hinge cover c2dand remove it.
Note: Even though this hinge cover is not used with the Flat Panel Monitor Rack Mount Kit, do not dis ard it. Store it with the other monitor stand parts you remove for possible future use.
4.Gently push the stand cover c3dand slide it backwards until it is completely off the stand.
5.Disconnect the signal cable and power cord from the flat panel monitor. Carefully remove and save the plastic cable clamp to free the power cord.
Note: The plastic cable clamp is reusable and is needed to secure the power cord after installing the Flat Panel Monitor Rack Mount Kit on the flat panel monitor.
Figure 28. Removing the plastic cable clamp
6.Lay the monitor facedown on a cushioned surface and remove the six screws that secure the hinges to the flat panel monitor.
