1x4 Console Switch | 2x8 Console Switch |
|
|
Two vertical mounting brackets | Two vertical mounting brackets |
|
|
Miscellaneous hardware kit (for attaching | Two horizontal mounting brackets, marked ’L’ |
brackets and installing the console switch in | and ’R’ (Left and Right) |
a rack cabinet) |
|
|
|
One 1.8 m (6 ft) power cord | Miscellaneous hardware kit (for attaching |
| brackets and installing the console switch in a |
| rack cabinet) |
|
|
One 1.5 m (4.9 ft) IEC connector power cable | One 1.8 m (6 ft) power cord |
|
|
Apex User Guide CD | One 1.5 m (4.9 ft) IEC connector power cable |
|
|
IBM NetBAY Console Switch Installation | Apex User Guide CD |
Instructions Manual |
|
|
|
| IBM NetBAY Console Switch Installation |
| Instructions Manual |
|
|
Note: A NetBAY Console Cable Set is required for each server that you will connect to a console switch, or for each console switch you will connect to another console switch in a tiered configuration. Console cable sets are available in different lengths, and are
Features
The 1x4 Console Switch allows you to connect up to four servers to a single monitor, keyboard, and mouse. Port A is located on the rear of the console switch and is where you connect the monitor, mouse, and keyboard. Ports 1 through 4 are where you connect each of your servers.
Server monitor ports
Primary monitor |
|
|
| Power connector |
|
|
|
| |
A | 1 | 2 | 3 | 4 |
Primary keyboard |
|
Primary mouse | Power switch |
|
Server keyboard
and mouse ports
The 2x8 Console Switch allows you to connect up to eight servers to a primary and secondary monitor, mouse, and keyboard. Port A is located on the rear of the console switch and is where you connect your primary monitor, mouse, and keyboard. Port B is located on the front of the console switch and is where you connect your secondary monitor, mouse, and keyboard. Ports 1 through 8 are where you connect each of your servers.
