NetBAY3 enclosure
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Casters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Foot pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Front cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 Device side rails . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 Stacking NetBAY3 enclosures. . . . . . . . . . . . . . . . .118 Parts Listing (NetBAY3). . . . . . . . . . . . . . . . . . . . . 121
Features
The IBM NetBAY3 enclosure provides a convenient
Note: Vertical measurements are given in rack units (U). One U is equal to 4.45 cm
Up to three NetBAY3 enclosures can be stacked under certain IBM servers. Devices such as the IBM EXP10, an uninterruptable power supply (UPS), or various telecommunications equipment can also be installed in a NetBAY3 enclosure.
Locations
The following sections contain information on specific equipment locations.
Important:
•The maximum server weight is 77 kg (170 lb.).
•Refer to the latest IBM Server Hardware Maintenance Manual when servicing the server.
•Assure all power and signal cables are routed properly and are not pinched.
•Make sure NetBAY3 enclosures in a stack are securely fastened together.
•Servers are lifted onto and off of the NetBAY3 enclosure. Make sure you have help when lifting.
•Servers are lifted onto and off of the NetBAY3 enclosure. Make sure you have help when lifting.
© Copyright IBM Corp. 2001 | 115 |
