1.Refer to the documentation that comes with your rack cabinet for additional information.
Note: Removing the rack doors and side panels might make your console switch installation easier.
2.Attach one vertical mounting bracket to each side of the console switch using two
Console switch
A
8
7
6
5
4
3
2
1
Vertical mounting bracket
Vertical mounting bracket
3.Hold the console switch against the side braces, with the rear of the console switch facing the back of your rack cabinet; then, use four M6 screws and nuts to attach the console switch to the side braces.
Continue with the rest of the procedure to cable your console switch.
Note: Refer to the Apex User Guide CD for additional information if you are configuring a tiered installation.
IBM NetBAY console switch 135
