Figure 48. Removing the existing monitor stand from the monitor
7.Lift off the hinge and monitor stand assembly. Store this assembly in a safe place for possible future use.
Installing the new monitor stand
Refer to “Removing the existing flat panel monitor stand” on page 103 for instructions on how to remove the existing stand from the flat panel monitor. Before installing the new stand, install the keyboard tray in the rack ac ording to the instructions that come with the rack or the keyboard tray option.
Note: The Flat Panel Monitor Rack Mount Kit and keyboard tray require 3U of rack mounting space. If the keyboard tray does not have at least 2U of clearance above it, relocate the keyboard tray within the rack.
Use the following steps to install the Flat Panel Monitor Rack Mount Kit:
1.Remove the cable cover c1dfrom the new monitor stand; then, remove the four screws (two per hinge) that secure the hinges c2dto the stand.
Figure 49. Removing the hinges from the new monitor stand
2.Install the hinges on the flat panel monitor, using the six screws that you removed from the old monitor stand.
NetBAY 42 Enterprise Rack (Type 9308 Models 42P, 42X, 4SA, 4SB, 42S, 42E) 105
