NetBAY Power Distribution Units 149
Statement 1
DANGER
Statement 13
To con nect :
1. Turn everything OFF.
2. First, atta ch all cables to devices.
3. Attach signal cables to connectors.
4. Attach pow e r cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. Fi rst, remove power cords from outl et.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Electrical current from power, telephone, and communication cables is
hazardous. To avoid a shock hazard:
•Do not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical
storm.
•Connect all power cords to a properly wired and grounded electrical
outlet.
•Connect to properly wired outlets any equipment that will be attached to
this product.
•When possible, use one hand only to connect or disconnect signal cables.
•Never turn on any equipment when there is evidence of fire, water, or
structural damage.
•Disconnect the attached power cords, telecommunicat ions systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.