IBM 4QX, 9TX, 9TS, 9QX, 9QS, 900, 4SB, 4SA, 42P, 42X, 200, 42E, 42S, 4QS manual Row

Flag Attributes

Enabled Names on

Row 14

Column 1

Color 2

Text 0

Mode Transparent

4.Highlight the setting to be changed and use the + and - keys to adjust the values. The following table describes each of the available menu attributes:

Setting	Values and Effect on Flag Appearance
Enabled	Flags Off = Flag does not appear
	Ports On = Flag shows the connected port number
	Names On = Flag shows the connected server by name
	Ports Timed = Port number displays for five seconds after connection
	Names Timed = Name displays for five seconds after connection
Row	Select values from 0–14 to position the flag vertically on the screen
Column	Select values from 0–25 to position the flag horizontally on the screen
Color	Select values from 0–7 for the flag color.
Text	Select values from 0–7 for the flag text color
Mode	Choose between Opaque and Transparent

5.Press the Enter key to save the settings. Press Esc at anytime before pressing Enter to cancel the operation and save the previous settings.

6.Press Esc to exit.

Assi ning specific device types: In situations where one or more servers need a special type of monitor device, it might be necessary to assign that device type to the port number associated with the server.

Note: When tiering, you must make the primary selector switch aware of the secondaries through the assignment.

Assign a device type as follows:

1.Press the Print Screen key.

2.Press the F2 key to display the Advanced Menu screen. Press the Right Arrow (g) key to move the highlighting to the Setup menu.

3.Using the Up Arrow (h) and Down Arrow (d) keys, move the highlighting to Devices and press the Enter key. The following menu appears:

Type 9306 Model 900/910 75