Refer to installation instructions in this document if you have a 9306 Model 900 Rack and are installing a new perforated front door.
Note: The illustrations in this documentation might be slightly different from your hardware.
Installing the new door on a model 900 rack cabinet
Use the following steps to remove your existing front door and install the new perforated door:
1.Refer to the rack documentation for information on removing side panels; then, remove the left side panel on the rack and set it aside.
2.If the front door is locked, unlock it; then, open the front door.
LockedUnlocked
3.While supporting the door, remove all four hinge pins that hold the front door in place; then, store the door in a safe place for possible future use.
Note: Save three of the hinge pins for later installation.
4.Remove the screw and nut that holds the hinge bracket c1din place; then, move the hinge bracket three mounting spaces downward and reinstall it at the new center location.
Type 9306 Model 900/910 53
