Blades

www.CasablancaFanCo.com

	Slide a blade into a slot located on the blade ring.	Install the blade using three blade screws
	Note: The blades will only fit properly over the	and washers, found in the hardware bag.
	Note: The blades will only fit properly over the	Repeat this process for all five blades.
	screws holes one way. If the holes do not line up,	Repeat this process for all five blades.
	screws holes one way. If the holes do not line up,
	remove the blade and turn it over.

1.888.227.2178

Image 10

Contents

Table of Contents Check box to see fan weight What to Expect with Your InstallationAssess location Ladder Power Drill Optional Bit optionalTools Needed Screwdriver included Bumper Ceiling PlateMake sure all four bumpers are Still attached Tabs to loosen the canopy ring and lower it down Hanging the FanUnlock the canopy cover from the canopy ring Body of the fan to hang the fan on Wiring FAN Before Wall ControlAfter Canopy Screw Hanging Slot Using both hands, lift the fan body fromCanopy Sides of the fan body between the head Ring TabTabs Washers, found in the hardware bag BladesRemove the blade and turn it over Light Kit Notch Battery Holder Door Operation Speed Battery HolderFan Lights Down Maintenance & Cleaning To prevent scratching. Cleaning products may Troubleshooting Fan doesn’t work Unpairing Procedure for Faulty Operation of Remote Controls

and washers, found in the hardware bag.