CANOPY ELECTRICAL CONNECTIONS
Step 6a. Attach the fan wires to the ceiling fixture outlet box wiring by twisting the bare ends of the wires together and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
wire nut
w-85 connections
Step 6b.
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLACK power wire from fan to BLACK power wire in ceil- ing outlet box. Secure with wire nut.
Step 6c. Pull Chain Connections
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLACK power wire from fan to Black wire from
•BLUE wire from fan to YELLOW wire from
If you will be installing an accessory light kit, also connect the BLUE light power wire from fan to the BLACK wires).
2 BLACK
2 WHITE WIRES
3 GREEN WIRES
Pull Chain
Connections
2 Black + 1 Blue 
2 WHITE WIRES
3 GREEN WIRES
CANOPY HATCH INSTALLATION
Step 7. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 8. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Tighten the screws firmly by hand only,
Step 9. Straighten the fan, then check to ensure that there is no movement be-
canopy
hatch
lock | tilt the | |
washer | ||
fan to | ||
| ||
canopy | install | |
last | ||
screw | ||
canopy | ||
| ||
| screw |
10
