Casablanca Fan Company 6643Z Speed Operation, Speed Optional Light Fixture Installation

4-SPEED OPERATION

Pull-chain switches on the fan control the fan and lights. Using the fan control pull-chain switch: Fan off at start.

First pull: fan ON, High speed

Second pull: Medium speed

Third pull: Medium Low speed

Fourth pull: Low speed

Fifth pull: Fan OFF

Using the optional light pull-chain switch: Light off at start.

First pull: light ON

Second pull: light OFF

Direction of blade rotation is controlled by the reverse slide switch on the side of the switch housing.

No changes in household wiring are required.

OPTIONAL LIGHT	FAN & SPEED CON-
PULL CHAIN	TROL
SWITCH	PULL CHAIN SWITCH

REVERSE

SWITCH

4-SPEED • OPTIONAL LIGHT FIXTURE INSTALLATION

NOTE: If a separate circuit is used to control the lights from a wall control, the BLUE D1-Option wire in the canopy should be con- nected to that switch leg.

1.Refer to light kit instructions to assemble and attach your light kit correctly.

2.Remove the two 8-32 screws from the switch housing cap.

3.Remove the plug from switch housing.

4.Install pull-chain switch and finger tighten collar on switch.

5.Connect one wire from pull-chain switch to the BLUE D1-Option wire. Secure splice with a wire nut.

6.Connect other wire from pull-chain switch to BLACK wire from light kit. Secure splice with a wire nut.

7.Connect WHITE wire from switch housing to WHITE wire from light kit. Secure splice with a wire nut.

8.At the canopy, connect the BLACK and BLUE wires.

SWITCH	COLLAR
HOUSING
white	Blue D-1
black
	light fixture

4-SPEED OPTIONAL WALL CONTROL • W-41

The W-41 wall control provides four-speed control of fan from a convenient wall location. The W-41 is designed to replace a standard wall switch and will fit wall boxes with a depth of 2” or greater. Not for use with single pull-chain fan/light option wiring.

To install a W-41 wall control in place of an existing wall switch, follow the instructions on the W-41 package.

Note: No rewiring is required if the fan is replacing an existing light fixture.

Operation of the fan from the wall switch is simple:

1. Turn knob to obtain desired speed setting.

CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of the fan and damage to the W-41 wall control. To confirm fan is set to HIGH: Turn W-41 fan speed switch to ‘HI’ - set fastest fan speed with pull chain.

4-SPEED • OPTIONAL WALL CONTROL • W-81

The W-81 wall control provides separate control of fan and light with two separate knobs from a convenient wall location. The W-81 is designed to replace a standard wall switch and wall boxes with a depth of 2” or greater. Requires two hot leads from wall box to ceil- ing wiring box.

To install a W-81 wall control in place of an existing		CAUTION! Failure to set the pull-chain
wall switch, follow the instructions on the W-81 package.		speed to HIGH can result in faulty operation
Operation of the fan from the wall switch is simple:		of the fan and damage to the W-81 wall
		control. To confirm fan is set to HIGH: Turn
1.	Turn the upper knob to the desired fan speed.
		W-81 fan speed switch to ‘HI’ - set fastest
2.	Turn the lower knob to the desired light setting.
		fan speed with pull chain.

	MED
LO	MED
	HI

OFFHI

OFF MAX

12