Twain™
4 To install the lag screw (if needed), slide the remaining washer onto the lag screw. Pass the lag screw through the center hole in the crossbar mounting bracket. Secure the lag screw into the guide hole, tightening until the ceiling fixture outlet box is firmly mounted to the support beam.
Attaching the Canopy
5 To install the canopy hardware, set aside the canopy hatch and attach the canopy to the crossbar mounting bracket with three of the canopy screws and lock washers. Using the
NOTE: On a sloped ceiling, align the canopy opening with the top or peak of the room.
Step 5
Canopy
Canopy hatch
Lock washers (4)
NO DRILL
Canopy screws (4)
10