Casablanca Fan Company C28GXXM warranty Ceiling Hardware, Getting Started

CEILING HARDWARE

		1″ x 8-32 ROUND
		HEAD SCREWS (2)
	WIRE NUT (4)
CROSSBAR	LAG SCREW AND WASHER	FLAT WASHER (2)
	(1)
MOUNTING
BRACKET

GETTING STARTED

Installing a New Ceiling Fixture Outlet Box

If you do not have an existing fixture located where you wish to place your Casablanca fan, an approved ceiling fixture outlet box must be installed and wired.

Warning: To reduce the risk of fire, electrical shock, or personal injury, mount to outlet box marked acceptable for ceiling fan support using the mounting hardware provided with the outlet box.

Using Existing Ceiling Fixture Outlet Box

After turning the power OFF at its source (either circuit breaker or fuse box), lower the old fixture and discon- nect the wiring. Check the ceiling fixture outlet box to be sure that it is marked ‘Approved for ceiling fan mount- ing’. If it is not, a new box must be installed.

CROSSBAR MOUNTING BRACKET INSTALLATION

Proceed with installation as follows:

Step 1. Place the wires from the ceiling outlet box to one side of the crossbar mounting bracket. Attach the bracket, with ground wire and ridges down, to the ceiling fixture outlet box with the mounting hardware included with the outlet box. Tighten the screws firmly by hand only, being careful not to bend the bracket by over tightening.

CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mounting bracket.

JOIST

CEILING WIRING

GREEN

GROUND

WIRE

CEILING FIXTURE

OUTLET BOX

(CEILING FAN

RATED)

CROSSBAR

MOUNTING

BRACKET

(RIDGE SIDE

DOWN)

WASHERS

(2)

1” X 8-32

ROUND-HEAD

SCREWS (2)

LAG SCREW

AND

WASHER (1)

4