Casio 140 CR Part-1 QUICK START OPERATION, ◗ To initialize the cash register, Note:, ◗To load the memory protection batteries, Important

Part-1 QUICK START OPERATION

Part-1QUICK START OPERATION

1. Initialization / Loading Memory Protection Battery

	◗ To initialize the cash register
	◗ To initialize the cash register
Important	1.	Set the Mode Switch to OFF.
You must initialize	2.	Load the memory protection batteries.
the Cash register.	3.	Plug the power cord of the cash register into an AC outlet.
	4.	Set the Mode Switch to REG.
	4.	Set the Mode Switch to REG.

1-Part

Note: To prevent to lose all of your settings and sales data, we reccomend you to install the memory protection batteries.

◗To load the memory protection batteries

1.Remove the printer cover.

2.Open the battery compartment cover.

3.Load 3 new UM-3, or R6P (SUM-3) type batteries into the compartment. Be sure that the plus (+) and minus (–) ends of each battery are facing in the directions indicated by the il- lustrations inside the battery compartment (Figure 1).

4.	Replace the memory protection battery compartment cover	(Figure 1)
	back into place.	(Figure 1)
	back into place.
5.	Replace the printer paper and printer cover.

REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY YEAR.