2307/2335/2355/2357-6

BATTERY REPLACEMENT

ALWAYS LEAVE BATTERY REPLACEMENT UP TO THE DEALER WHERE YOU BOUGHT THE WATCH OR TO AN AUTHORIZED CASIO DISTRIBUTOR. BE SURE TO SHOW THE FOLLOWING INFORMATION TO THE PERSON REPLACING THE BATTERY.

Attention dealer or CASIO distributor

Be sure to use the following procedure when replacing the battery.

1.Remove the back cover screws, and then remove the back cover.

2.Pull up the battery holder.

3.Remove the old battery and load a new one.

4.Close the battery holder.

5.Touch the AC contact and the battery (+) side with metallic tweezers.

6.Replace the back cover and secure it with the screws.

7.Check the display of the watch. If the message “OPEn” is on the display, it means the back cover is not closed correctly. Remove the back cover and carefully replace it again.

*Absence of the “OPEn” message does not necessarily indicate an air-tight seal.

Other tests are required to check for air tightness.

WARNING INDICATORS

This watch displays warning indicators to let you know when the sensor is malfunctioning and when battery power is low.

Err Display – Sensor Malfunction Warning

This message indicates malfunction of the watch’s pressure sensor circuitry. When sensor malfunction initially occurs, the watch stops taking measurements, the “Err” message appears, and a buzzer sounds for about three seconds.

If the sensor is malfunctioning when it comes time for a barometric pressure measurement to be taken, the barometric pressure value and altitude value appears as “– – – –” on the display and the corresponding point on the barometric pressure graph is left blank.

Whenever there is a sensor malfunction, be sure to take the watch to an authorized CASIO distributor or Service Center as soon as possible.

Alteration of and Graph – Temporary Low Power Warning

Temporary low power is indicated on the display when the battery level temporarily drops below a certain level.

Sensors are disabled while the temporary low power warning is being indicated, but the light and tones are operational.

Very low temperature can cause the low power warning to appear even though battery power is not low. The low power warning should disappear when the watch is restored to normal temperature.

If the low power warning appears under normal temperature, replace the battery as soon as possible.

Alteration of and – Battery Usage Warning

The watch automatically monitors your use of certain high battery drain functions. The battery usage warning display appears whenever the watch determines that your use of these functions is putting a heavy load on the battery.

Sensors, the light, and tones are disabled while the battery usage warning is on the display.

The following are the trigger values for the functions that are monitored for battery usage.

Light: 100

Sensor Operations: 1,000

Alarm: 100

Mode Change: 1,000

The battery usage warning appears whenever any single function is performed the number of times noted above, or for any proportional number of operations of multiple functions (such as 50 light operations and 50 alarm operations, 50 light operations and 500 mode change operations, etc.).

The monitor counter continues to be incremented as long as the duration between two high power drain operations is less than 15 minutes. The counter is reset to 0 whenever 15 minutes pass between operations.

Display – Low Power Warning

The low power warning appears to let you know that battery power is low.

Sensors, the light, and tones are disabled while the low power warning is on the display.

The low power warning may appear under very low temperatures, although battery power is not low. Correct operation should resume when the watch returns to normal temperature.

If the low power warning appears under normal temperatures, have the watch’s battery replaced as soon as possible.

Be sure to read “BATTERY REPLACEMENT” before trying to replace the battery.

ABOUT ALTITUDE AND BAROMETRIC

PRESSURE MEASUREMENTS

Altimeter

Generally, barometric pressure and temperature decrease as altitude increases. This watch bases its altitude measurements on International Standard Atmosphere (ISA) values stipulated by the International Civil Aviation Organization (ICAO), which define relationships between altitude, barometric pressure, and temperature.

 

ALTITUDE

BAROMETRIC PRESSURE

TEMPERATURE

 

6000 m

472 hPa/mb

About 6.7 hPa/mb per 100 m

 

–24°C

 

 

 

5500 m

 

 

 

 

 

 

 

 

 

540 hPa/mb

 

–17.5°C

 

 

 

 

 

 

 

 

 

 

5000 m

About 7 hPa/mb per 100 m

 

 

 

 

4500 m

616 hPa/mb

About 8 hPa/mb per 100 m

 

–11°C

 

 

 

 

4000 m

 

 

 

 

3500 m

701 hPa/mb

 

 

 

 

–4.5°C

About 6.5°C

 

3000 m

About 9 hPa/mb per 100 m

 

 

 

per 1000 m

 

 

 

 

 

 

 

 

2500 m

795 hPa/mb

 

 

 

 

2°C

 

 

 

 

2000 m

About 10 hPa/mb per 100 m

 

 

 

 

1500 m

899 hPa/mb

About 11 hPa/mb per 100 m

 

8.5°C

 

 

 

1000 m

 

 

 

 

 

 

 

 

 

 

 

500 m

1013 hPa/mb

About 12 hPa/mb per 100 m

 

15°C

 

 

 

0 m

 

 

 

 

 

 

 

Source: International Civil Aviation Organization

 

 

 

 

 

 

 

 

 

ALTITUDE

BAROMETRIC PRESSURE

TEMPERATURE

 

20000 ft

 

 

 

13.76 inHg

About 0.119 inHg per 200 ft

 

–12.2°F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18000 ft

16.22 inHg

 

About 0.1315 inHg per 200 ft

 

2.0°F

 

 

 

 

16000 ft

 

 

 

 

 

 

14000 ft

19.03 inHg

 

 

 

16.2°F

 

 

 

12000 ft

 

About 0.15 inHg per 200 ft

 

About 3.6°F

 

10000 ft

22.23 inHg

 

About 0.17 inHg per 200 ft

 

30.5°F

 

per 1000 ft

 

8000 ft

 

 

 

 

 

6000 ft

25.84 inHg

 

About 0.192 inHg per 200 ft 44.7°F

 

 

 

4000 ft

 

 

 

2000 ft

29.92 inHg

About 0.21 inHg per 200 ft

 

59.0°F

 

 

 

0 ft

 

 

 

 

Source: International Civil Aviation Organization

There are two standard methods of expressing altitude: Absolute altitude and relative altitude. Absolute altitude expresses an absolute height above sea level. Relative altitude expresses the difference between the height of two different places.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Height of building 130 m

 

Rooftop at an altitude of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

230 m above sea level

 

 

 

 

 

 

 

(Relative altitude)

 

 

 

 

 

 

 

 

 

(Altitude above sea level)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sea
Barometer

Barometric pressure indicates changes in the atmosphere, and by monitoring these changes you can predict the weather with reasonable accuracy. Rising barometric pressure indicates good weather, while falling pressure indicates deteriorating weather conditions.

The barometric pressures that you see in the newspaper and on the TV weather report are measurements corrected to values measured at 0 m sea level.