Operation Guide 3334
Using the Stopwatch
Setting the Time and Date Manually
The stopwatch measures elapsed time in units of 1/100 second up to 99 minutes, 59.99 seconds (100 minutes). When the maximum limit is reached, the elapsed time automatically returns to zero and timing continues from there.
You can use the following procedure to set the current time and date of the Home City that you have selected in the Timekeeping Mode.
2. Use the D (+) and B
(Back)
Performing Stopwatch Operations
In the Stopwatch Mode, press the D button.
•Each press of the D button starts or stops the stopwatch.
1/100 second
(Split/Reset)
(Start/Stop)
Minutes Seconds
❚Elapse Time Measurement
Start Stop Reset
Cumulative Time Measurement
Pressing the B button to restart the stopwatch without resetting it to all zeros resumes elapsed time measurement from where it was last stopped.
❚Split Time Measurement
Start | Record split Release split | Stop | Reset |
❚1st and 2nd Place Finishers
Start | 1st finisher | 2nd finisher | Displays time | Reset |
| (Displays time |
| of 2nd finisher. |
|
| of 1st finisher.) |
|
|
|
•Use the Timekeeping Mode to adjust the time and date settings.
•You can also use the procedure below to turn power saving on and off.
If you are planning manually change both the digital and analog settings, be sure to adjust the digital setting first.
Manually Setting the Time and Date
1. In the Timekeeping Mode, hold down A for about one second until the city code starts to flash in the bottom dial. This is the setting screen.
one you want to use as your Home City is displayed.
•See “City Code List” for a
| complete list of city codes. | TYO = Tokyo |
• | Holding down either button |
|
| scrolls the city codes at high |
|
| speed. |
|
3. | Press the C button to |
|
| display the summer time |
|
| setting in the bottom dial. |
|
(Forward)
City Code
•Pressing B while timing is being performed freezes the current elapsed time in the bottom dial, but timing of the next split continues internally.
• Changing to another mode while a split time is displayed cancels the split time operation.
•Pressing the B button while timing is stopped resets the stopwatch to all zeros.
4. Press the D button to
5. Use the C button to cycle
To select 12/24-hour timekeeping
To change the hour, minutes, year, month, or day
cycle through the summer time settings until the one you want is displayed.
•AUTO
This setting enables auto summer time setting, which turns summer time on or off in accordance with the received time calibration signal.
•This setting uses Japan summer time data when TYO is selected as the Home City code, and U.S. summer time data when NYC, CHI, DEN, or LAX is selected as the Home City code.
•OFF
This setting turns off summer time, and displays the current time normally.
•ON
This setting turns on summer time.
•Selecting this setting displays the DST indicator, and advances the current time setting by one hour.
through the time and date settings shown below.
• Each press of C causes the applicable setting to flash.
Home City |
| Summer Time |
| |
|
| Format | ||
|
|
|
| |
Power Saving |
|
|
| Seconds |
Day | Month | Year | Minutes | Hour |
6. While the setting you want to change is selected (flashing), use the D and B buttons to change it as described below.
While the
To reset the seconds to 00
While the seconds are selected in the left dial, press the D button to reset them to 00 in accordance with the time signal on the radio, TV, etc.
• Pressing D while the seconds |
|
count is in the range of 30 to 59 |
|
resets it to 00 and also adds 1 to |
|
the minutes. Pressing D in the |
|
range of 00 to 29 resets the |
|
seconds count without changing | Resets to 00 seconds |
the minutes. |
|
setting
Press the D button to increase the selected setting or the B button to decrease it.
•Holding down either button scrolls the setting at high speed.
•When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly when using
•You can set a year in the range of 00 (2000) to 99 (2099). The day of the week is set automatically in accordance with the date you set.
•The watch automatically makes adjustments for leap years and month lengths.
To turn power saving on and off
While the power saving setting is selected, press the D button to toggle it ON and OFF.
•Turning on power saving causes the power saving indicator to
appear in the top dial.
(Back)
(Forward)
Hour Minutes
7