Operation Guide 3334

7. After all of the settings are configured the way you want, press the A button.

•This exits the setting screen.

•The watch also will exit the setting screen automatically if you do not perform any operation for about two or three minutes.

Digital-Analog Synchronization

The watch automatically adjusts its analog setting to match the current digital time setting.

•When adjusting the analog time, the watch always moves the hands forward (clockwise direction).

•Depending on how different the digital and analog time settings are, it may take some time for the analog hand setting procedure to be finished.

Manually Setting the Analog Time

You can use the Hand Setting Mode to manually adjust the analog time when it does not match the digital time.

1. Use the C button to enter the Hand Setting Mode.

2. Hold down A for about one second until the time digits start to flash in the bottom dial. This is the setting screen.

3. Use the D button to adjust the analog time.

• Each press of the D button advances the analog time by 20 seconds.

• Holding down the D button

 

advances the analog time at

(Forward)

high speed.

 

High-speed Lock

•While holding down the D button (which advances the analog time at high speed), press the B button to lock high-speed advance of the analog time.

•High-speed analog time advance will continue until it completes a 12-hour cycle, or until you press any button to stop it.

4. After the setting is the way you want, press the A button.

•This exits the setting screen and automatically synchronizes the minute hand with the current seconds count.

•The watch will also exit the setting screen automatically if you do not perform any operation for about two or three minutes.

8