Operation Guide 5142
3.Rotate the crown to set the alarm time.
ξRotating the crown two full consecutive turns away from you will cause the
c Minute Hand to start moving clockwise. Rotating the crown another two full consecutive turns away from you will cause the c Minute Hand to start moving at high speed. To stop hand movement, press any button or rotate the crown one full turn towards you.
4.Press Bto switch to the hour setting mode.
ξThe z Hour Hand will move slightly left and right to indicate the z Hour Hand setting mode.
ξIf you want to change the hour setting without changing the minute setting, skip step 4 above.
ξWhen adjusting the alarm time setting, check to make sure that the x Second Hand correctly indicates A (AM) or P (PM).
5.Rotate the crown to adjust the hour setting only.
ξRotating the crown two full consecutive turns away from you will cause the z Hour Hand to start moving clockwise.
6.After the setting is the way you want, push the crown back in to exit the alarm setting mode. Next, lock the crown.
ξThe alarm always works based on the time kept in the Timekeeping Mode.
ξThe watch will return to the Timekeeping Mode automatically if you do not perform any operation in the Alarm Mode for about two or three minutes.
ξRotating the ring without pushing it down as far as it will go will change the settings of the watch. When locking the crown, be sure to press down firmly on the ring as you rotate it.
|
|
To check the AM/PM setting of the alarm
In the Alarm Mode, press Band the x Second Hand will move to either A (AM) or P (PM).
ξThe x Second Hand will return to the current ON/OFF setting after about one second.
To turn the alarm on or off
In the Alarm Mode, press Ato toggle the alarm between on and off. The x Second Hand will indicate the current ON/OFF setting.
To stop the alarm
Press any button or press the crown button.
Checking the Current Time in a Different Time Zone
You can use World Time to view the current time in one of 29 time zones around the globe. The currently selected city is called the “World Time City”.
NYC (NEW YORK) | Hands and Indicators | |
| z Hour Hand: Indicates the hour of the current time in the | |
| World Time City. | |
| x Second Hand: Indicates the currently selected World | |
| Time City. | |
| ξ Pressing Bcauses the x Second Hand to move to | |
A (AM) or P (PM). | ||
c Minute Hand | ||
| ||
| v Mode Disk: WT aligned with mode pointer. | |
| n Day |
|
|
To view the time in another time zone
1.Unlock the crown and then pull it out.
ξThe x Second Hand points to the currently selected World Time city code.
ξThe mode pointer will point to either STD (standard time) or DST (daylight saving time) on the v Mode Disk, which indicates the current daylight saving time setting.
ξIf you do not perform any operation with the crown for about three minutes after pulling it out, crown operations will become disabled and the watch hands will no longer move when you rotate the crown. If this happens, push the crown back in and then pull it out again.
2.Rotate the crown to move the x Second Hand to the city code you want to select as the World Time City.
ξEach time you select a city code, the z Hour Hand, c Minute Hand, and n Day move to the current time and date for that city code. For details about city codes, see the “City Code Table” at the back of this manual.
ξIf you think that the time indicated for the selected World Time City is not correct, it probably means that there is something wrong with your Home City settings. Use the procedure under “To configure Home City settings” (page
3.After selecting the city you want, push the crown back in to return to the World Time Mode. Next, lock the crown.
ξRotating the ring without pushing it down as far as it will go will change the settings of the watch. When locking the crown, be sure to press down firmly on the ring as you rotate it.
|
|
To check whether a time zone is AM or PM
In the World Time Mode, press Band the x Second Hand will move to either A (AM) or P (PM).
3.Press Ato toggle the time for the currently selected city code between STD (standard time) and DST (daylight saving time).
ξThe x Second Hand will return to the city code you
selected after about one second.
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, unlock the crown and then pull it out to enter the city setting mode.
2.Rotate the crown to move the x Second Hand to the city code whose setting you want to change. See “To view the time in another time zone” (page
A
The auto mode
4.Push the crown back in to return to the World Time Mode. Next, lock the crown.
ξNote that you cannot switch between STD (standard time)/DST (daylight saving time) while UTC is selected as the World Time City.
ξNote that the STD (standard time)/DST (daylight saving time) setting affects only the currently selected time zone. Other time zones are not affected.
ξRotating the ring without pushing it down as far as it will go will change the settings of the watch. When locking the crown, be sure to press down firmly on the ring as you rotate it.
Adjusting Home Positions
Strong magnetism or impact can cause the hands and/or day of the watch to be off, even if the watch is able to perform the signal receive operation. If this happens, perform the applicable home position adjustment procedures in this section.
ξHand home position adjustment is not required if the time and day settings are correct.
Note
ξAny time after you enter the home position adjustment mode in step 2 of the following procedure, you can return to the Timekeeping Mode by pushing the crown back in. In either case, any adjustments you made before the watch returned to the Timekeeping Mode will be applied.
ξIf you do not perform any operation with the crown for about three minutes after pulling it out, crown operations will become disabled and hands will not move if you rotate the crown. If this happens, push the crown back in and then pull it out again.
To adjust home positions
1.Press and hold the crown button (without unlocking the crown) for at least two seconds to enter the
| Timekeeping Mode. |
| 2. Unlock the crown and then pull it out. |
| ξ This will cause the x Second Hand to move to the city |
code of the currently selected Home City. |
3. Hold down Bfor about seven seconds. The x Second Hand will stop at 12 o’clock. The v Mode Disk should rotate until the lap pointer is pointed at 
.
ξThis indicates the home position adjustment mode.
ξFirst is v Mode Disk home position adjustment.
ξIf the lap pointer is pointed at 
, it is in the correct
home position. If it isn’t, rotate the crown to move the lap pointer to 
.