Playing Back
Adjusting the Song Volume
You can use the following procedure to adjust the volume level of the song’s Auto Accompaniment, without affecting the volume of keyboard tone output. For details, see “Song Volume” (page
Practicing Either Hand’s Part (Part Off)
You can turn off the right hand part*1 or left hand part*2 of a song and play that part on the Digital Piano while the song plays back.
*1 Song data Channel 4 (fixed)
*2 Song data Channel 3 (fixed)
1. Press the bt (PART) button.
This causes
2. Use the ct (w, q) buttons to turn off the part you want.
Press (w) to toggle the left hand part or (q) to toggle the right hand part on and off.
3. Press the bt (PART) button again.
4. Hold down the bn (MUSIC LIBRARY) button for at least two seconds.
•This will assign the same tone as the hand that is turned off to the keyboard.
5.Press the bs (PLAY/STOP) button to start song playback.
The part you turned off does not sound, so you can play it on the keyboard.
Sounding a Count at the Beginning of a Song
You can configure the Digital Piano to sound a count before playback of a song starts, which helps to get the timing right when you are playing along on the keyboard. For details, see
Repeating Playback of a Specific Section (Repeat)
You can configure the Digital Piano to repeat the section of a song you want to practice. You could, for example, specify repeat play from measure 5 to measure 8.
Start |
|
| End | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The bo (REPEAT) button lamp flashes at this time.
3. When playback reaches the last measure of the section you want to repeat, press the bo (REPEAT) button again.
This makes the measure the “end measure”.
Repeat playback of the specified section starts as soon as you select the end measure.
The bo (REPEAT) button lamp is lit (not flashing) at this time.
4. Pressing bo (REPEAT) again returns to normal play.
This will cause the bo (REPEAT) button lamp to go out.