Getting Ready 
3. Slide back panel C into the grooves 4 of the side panels.
•Before sliding back panel C into place, make sure that the widely spaced screw holes along the bottom of the panel are on the left (when viewed from the front of the stand), and the narrowly spaced holes are on the right.
C
4
4.Use the two screws H to secure the top left and right edges of the back panel C to the brackets 5 of side panels A and B.
•At location 6, slip the clip G onto to the screw H before installing the screw.
| B | 5 |
6 |
| |
| A | |
|
| |
G |
|
|
H
H
5. Next, secure the bottom of the back panel C with the six F screws.
B 
A
C
F
6. Adjust the height adjustment screw 7 to provide support so crosspiece D does not bow downwards when the pedals are pressed.
D7
IMPORTANT!
•Pressing the pedals without adjusting height adjustment screw 7 can result in damage to crosspiece D. Always make sure you adjust height adjustment screw 7 before operating the pedals.
English