Power Outlet

After you finish assembling the stand, turn on the digital piano. For details, see “Getting Ready” on page E-56.

Turning Power On or Off

1. Press the 1 (P) button to turn on Digital Piano power.

Front

Power lamp

2. After a short while, the display screen should appear as shown below, which indicates that the Digital Piano is ready to be played.

•Use the Digital Piano’s VOLUME controller (2) to adjust the volume.

3.To turn off the Digital Piano, hold down the 1 (P) button until the power lamp goes out.

NOTE

•Pressing the 1 (P) button to turn off power actually puts the Digital Piano into a standby state. Minute amounts of current continue to flow within the Digital Piano in the standby state. If you do not plan to use the Digital Piano for a long time or if there is a lightning storm in your area, be sure to unplug the AC adaptor from the power outlet.

Auto Power Off

This Digital Piano is designed to turn off automatically to avoid wasting power after no operation is performed for a preset amount of time. The Auto Power Off trigger time is about four hours.

•You also can use the procedure below to temporarily suspend Auto Power Off.

■To disable Auto Power Off

1. While the Digital Piano is turned on, press the

1 (P) button to turn it off.

2.While holding down the cs (FUNCTION) button, press the 1 (P) button to turn on the Digital Piano.

•Auto Power Off will be disabled at this time.

NOTE

•Turning off the Digital Piano after performing the above steps will re-enable Auto Power Off.

English

E-5