Casio AP45ES1C Using Layer, Basic Operation, These conditions:, To layer two tones, to be applied to both the, Cause these digital effects

							Basic Operation
	Using Layer					How digital effects are applied when layering is turned
With layer you can assign two different tones (a main tone						on
						The following are the rules that determine what type of digital
and a layered tone) to the keyboard, both of which play
						effects are applied to two tones that are layered.
whenever you press a key.
							Cause these digital effects
						These conditions:	to be applied to both the
							main tone and layered tone:
					Main tone + Layered tone	• Digital effects turned on
						for the main tone
To layer two tones						• Digital effects turned on	Main tone digital effects
						or off for the layered
NOTE						tone
						• Digital effects turned off
	• To use the variation tone for the main tone and/or the
						for the main tone	Layered tone digital effects
		layer tone, perform the required operation to turn on the
						• Digital effects turned on
		variation tone(s) before starting the procedure below.
						for the layered tone
						• Digital effects turned off
1 While holding down the tone button of the main						for the main tone	None
						• Digital effects turned off
			tone, press the tone button for the layer tone.
						for the layered tone
			• This causes the indicator lamp of the main tone button
				to light, and the lamp of the layer tone button to flash.
			• Whether the normal tone or variation tone is selected
				for the main tone and layer tone depends on the
				normal tone/variation tone setting of the tone button
				you press. The indicator lamp above the VARIATION
				button is lit when the variation tone is selected for
				the main tone.

2Now try playing something on the keyboard.

•Note should sound using both of the tones you selected.

3To cancel layering, press any tone button.

NOTE

•If you change or turn off a digital effect while layering is turned on, the setting you make is saved to the main tone’s settings only.

•You cannot layer two tones that are assigned to the same tone button (for example: ELEC PIANO 1 + ELEC PIANO 2, or HARPSICHORD + VIBRAPHONE).

430A-E-015A E-13