Assembly Instructions
3 Connecting the Pedal | CAUTION | |
• The screws that you use to assemble the stand may | ||
| ||
| become loose after a long period due to changes in | |
Figure 8 | temperature and humidity, or vibration caused by normal | |
Clip | use, etc. Periodically check the screws used to fasten | |
the stand and the butterfly bolts used to fasten the stand | ||
| and the digital piano, and tighten them whenever | |
| necessary. |
• To power the digital piano, use a power outlet that allows easy access when plugging in or unplugging the power cord.
Pedal plug
Position the pedal plug as shown in Figure 8 and insert it | Attachment of the Score Stand |
into the pedal connector on the bottom of the digital piano. |
|
Secure the pedal cable to the upright of the stand using the | Install the music stand by inserting its pegs into the holes in |
clips (Figure 8). | the top of the piano. |
4 Connecting to a Power Supply |
|
Figure 9
Power cord
Household wall outlet
1.Check to make sure that the digital piano’s POWER button is in the OFF position. If it is ON, press the button to switch it OFF.
2.Attach the power cord that comes with the digital piano to the bottom of the digital piano.*
3.Plug the digital piano’s power cord into a wall outlet (Figure 9).
*applies to the
Important!
•The shapes of the digital piano’s power cord and wall outlet should be different according to countries or regions. The illustrations are examples.
•With the