Casio CDP-220R Display, to edit, English, Settings, setting you want, 5. Press bo (RHYTHM), pattern you selected in step, you want (intro through ending)

Editing Auto Accompaniment Patterns

3. Press a button from 3 to 6 to select the

7. To edit the other contents, press ck

Accompaniment Pattern you want to edit.

(FUNCTION) to display the screen for the

The name of the pattern will appear on the display.

setting you want.

• Each press of ck (FUNCTION) will cycle through the

settings shown below, from 1 through 6.

D r m : R h y

•

Use the br (10-key) [–] and [+] keys to change the

currently selected setting.

•

You can play the current settings of the editable part by

pressing 7.

Setting Type

Display

Settings

1

Part on/off

Part

On/Off

5 Variation selected

2

Tone number*

Tone

001 - 683

Pattern selected by each button

3

Volume level

Vol.

000 - 127

3: Intro

4

Left-right speaker balance

Pan

–64 - 0 - +63

4: Normal, Normal Fill-in

(panning)

(Each press toggles the selection.)

5

Reverb depth (reverb send)

Rvb

000 - 127

5: Variation, Variation Fill-in

6

Chorus depth (chorus send)

Cho.

000 - 127

(Each press toggles the selection.)

6: Ending

* Instrument parts 1 and 2 can be assigned drum set tones

4. Press 8 to select the instrument part you want

(built-in tones 684 to 700) only.

8. Repeat steps 4 through 7 as many times as

to edit.

The part number of the part you select will flash on the

necessary to edit the parts you want for the

display.

pattern you selected in step 3.

Flashing: Part selected for editing.

•

If you change the rhythm number in step 6, the editable

contents (1 through 6 in the above table) you last

configured in step 7 of this procedure will be overwritten

with the settings of the newly selected rhythm.

9. Repeat steps 3 through 8 as many times as

necessary to edit the accompaniment patterns

Parts that contain data.

Part 6 (Chord 3)

you want (intro through ending).

5. Press bo (RHYTHM).

10. Press

bl

.

This will display the rhythm name.

This will display a message asking if you want to save the

6. Use the br (10-key) [–] and [+] keys to select

user rhythm.

the rhythm number you want to assign to the

instrument part you are editing.

A different rhythm number is assigned for each instrument

part.

•

You can play the data of the currently selected rhythm

number by pressing 7.

•

All of the eight instrument parts of an intro (I-1 to I-8)

must have the same rhythm number. If you assign

rhythm 003 to I-1, for example, 003 also will be

assigned automatically to parts I-2 through I-8. If you

then assign rhythm 004 to part I-2, for example, I-1 and

all of the other parts also will change to 004. All of the

eight parts of an ending (E-1 to E-8) also must have the

same rhythm number.

English

E-45