Casio CE-T100 manual 57

Department key feature programming

There are two different methods you can use to assign features to department keys.

With “Batch feature programming”, you can use a single operation to assign multiple features. “Individual feature programming”, on the other hand, let you assign features one-by-one.

This method is recommended for programming of special features to individual department keys.

Batch feature programming

When using this procedure to assign multiple features to departments, use 9-digit codes that you create using the following procedure

To other department key

PGM 63s6::::;;;:: 6 Department 6s D9 D8 D7 D6 D5 D4 D3 D2 D1

Mode Switch

	Negative department			a	No = 0
					Yes = 2		a+b = :D
	Hash department			b	No = 0					9
					Yes = 4
	Single item sale				No = 0				:D
					Yes = 1					8
	High digit limit specification				Significant				:D
					number					7
	Taxable status 1 (for the U.S. model)			a	No = 0
					Yes = 1
	Taxable status 2 (for the U.S. model)			b	No = 0	a+b+c = :D
					Yes = 2					6
	Taxable status 3 (for the U.S. model)			c	No = 0
					Yes = 4
	Taxable status (for the Canadian model)				Significant				:D6
	Non tax = 0, Taxable 1 = 1, Taxable 2 = 2, Taxable 3 = 3, Taxable 4 = 4,
	Taxable 1 & 2 = 5, Taxable 1 & 3 = 6, Taxable 1 & 4 = 7				number
	Always “000”						;~ ;D			5	~ D
											3
	Group link (00 ~ 50)				Significantnumbers			::D		D
										2	1
Department designation		for the U.S.					for Canada
	Department	!(Dept.1)	dd!(Dept.49)				&(Dept.1)
		"(Dept.2)	dd"(Dept.50)				'(Dept.2)
		:	:			:
		%(Dept.24)	dd%(Dept.72)
							.(Dept.24)
		d!(Dept.25)	ddd!(Dept.73)
		:	:
		d%(Dept.48)	ddd%(Dept.96)

Convenient Operations and Setups

57 E