Casio CE-T100 manual 63s

To a new (not sequential) PLU

PLU feature programming

There are two different methods you can use to assign features to PLUs.

With “Batch feature programming”, you can use a single operation to assign multiple features. “Individual feature programming”, on the other hand, let you assign features one-by-one. This method is recommended for programming of special features to individual PLUs.

Batch feature programming

When using this procedure to assign multiple features to PLUs, use 9-digit codes that you create using the following procedure.

			Different program to the next PLU
PGM	63s
		6PLU No.*	6
		(1 ~ 1000; U. S.)
		(1 ~ 500; Canada)
Mode Switch
		6::::;::;; 6 a 6s
		D9 D8 D7 D6 D5 D4 D3 D2 D1

Negative PLU	a	No = 0
		Yes = 2		a+b = :D9
Hash PLU	b	No = 0
		Yes = 4
Single item sale	a	No = 0
		Yes = 1		a+b = :D8
Treat as subdepartment/PLU.	b	PLU = 0
		Subdept. = 4
High digit limit specification (for subdepartment)		Significant				:D
		number
			7
Taxable status 1 (for the U.S. model)	a	No = 0
		Yes = 1
Taxable status 2 (for the U.S. model)	b	No = 0	a+b+c = :D
		Yes = 2
			6
Taxable status 3 (for the U.S. model)	c	No = 0
		Yes = 4
Taxable status (for the Canadian model)		Significant				:D6
Non tax = 0, Taxable 1 = 1, Taxable 2 = 2, Taxable 3 = 3, Taxable 4 = 4,
Taxable 1 & 2 = 5, Taxable 1 & 3 = 6, Taxable 1 & 4 = 7		number
Always “0”						;D5
Department link (00 ~ 96; U.S., 00 ~ 24; Canada)		Significantnumbers			::D D		3
			4
Always “00”					;;D2 D1

Convenient Operations and Setups

59 E