Applying Effects to Tones

REVERB

CHORUS

Number buttons

[+]/[–]

DSP

This keyboard provides you with a selection of effects that you can apply to tones.

The built-in effects include a wide variety of variations that give you access to a selection of general digital effects.

Effect Blocks

The following shows how the effects of this keyboard are or- ganized.

 

 

REVERB

 

 

CHORUS

Sound Source

 

EQUALIZER

 

off

 

 

 

on

Output

16ch

DSP

DSP Line

REVERB

Reverb simulates the acoustics of specific types of environ- ments. You can choose from among 16 different reverb ef- fects, including “Room” and “Hall.”

CHORUS

The chorus effect gives sound greater depth by causing it to vibrate. You can choose from among 16 different chorus ef- fects, including “Chorus” and “Flanger.”

DSP

DSP effects are applied to the connection between the sound source and output. You can select distortion and modulation effects. You can create DSP effect setups and also transfer downloaded DSP data from your computer. The keyboard has memory for up to 10 DSP effect setups, which you can store. See “Using the Data Download Service” on page E-68 and “Saving the Settings of DSP Parameters” on page E-26 for more information.

Selecting REVERB and CHORUS

Perform the following steps to select REVERB or CHORUS.

1. Press the button (REVERB or CHORUS) for the effect you want to select, so the button’s indicator is shown on the display screen.

•An indicator is on the display next to REVERB or CHORUS when the effect is turned on. The indicator is not displayed when the corresponding effect is turned off.

Example: Indicator after the REVERB button is pressed

Lit

2. Use the [+] and [–]buttons or the number buttons to scroll through the effects until the one you want is displayed, or use the number buttons to input the effect number you want to se- lect.

•See the list on page A-10 for information about the types of CHORUS and REVERB effects that are avail- able.

•Here you could also change the parameters of the ef- fect you selected, if you want. See “Changing the Set- tings of REVERB and CHORUS Parameters” for more information.

703A-E-025A

E-23