Using Real-time Recording
With
To record with real-time recording
1. Press the SONG MEMORY button twice to enter
•Perform step 2, below, within five seconds after en- tering record standby.
2.Use the [+] and
Song number (0 or 1)
R e c o r d•The above song number screen remains on the dis- play for about five seconds. If it disappears before you have a chance to select a song number, use the SONG MEMORY button again to
3.Press the CHORD/TR1 button, which is one of the SONG MEMORY TRACK buttons, to select Track1.
•The level meters for tracks 11 through 16 are shown on the display while the keyboard is in record stand- by, so you can easily check which tracks are already recorded. See “Level Meter Contents During Record/ Edit Standby” on page
4.Make the following settings.
•Tone number
•Rhythm number
•Tempo
•MODE switch
5.Press the START/STOP button to start recording.
•When recording starts, the REC indicator flashes on the display. After a few moments the indicator stops flashing, and remains on the display.
6.Play something on the keyboard.
•You can also record Auto Accompaniment chords by selecting the applicable mode with the MODE switch.
•Optional pedal operation is also recorded. See “Track 1 Contents After
7. Press the START/STOP button to end recording when you are finish playing.
•If you make a mistake while recording, you can stop the record operation and begin over again from step 1, or you can use the editing function (page
❚NOTE
•Using
Track 1 Contents After Real-time Record-
ing
In addition to keyboard notes and accompaniment chords, the following data is also recorded to Track 1 during real- time recording. This data is applied whenever Track 1 is played back.
•Tone number
•Rhythm number
•INTRO/ENDING 1 button, INTRO/ENDING 2 button,
•Pedal operations (option)
•Effect type
•Accompaniment volume
❚NOTE
•Starting a record operation also records the Mixer settings for the other tracks to the song header.