SONG MEMORY

Number buttons

START/STOP

[+]/[–]

SONG MEMORY TRACK

Recording Multiple Tracks

Track 1 of the keyboard’s song memory records Auto Accompaniment and keyboard play. In addition, there are five other melody tracks that you can use to record melody parts only. You can record different tones to the melody tracks and build a full ensemble of instruments for your recordings. The procedure you use for recording to Tracks 2 through 6 is identical to the one you use when recording to Track 1.

To record to Tracks 2 through 6 using real-

time recording

You can record to Tracks 2 through 6 while playing back what you originally recorded on Track 1 and any other tracks that are already recorded.

1. Press the SONG MEMORY button twice to enter record standby, and then use the [+] and [–]buttons to select a song number (0/1).

•The song number you select should be the one where you previously input Track 1.

2.Use the SONG MEMORY TRACK buttons to se- lect the track you want to record to (2 through 6).

•While the keyboard is in record standby, the display shows the level meters for channels 11 through 16, so you can check which tracks have already been record- ed. See “Level Meter Contents During Record/Edit Standby” on page E-53 for details.

3.Make the following settings.

•Tone number

•Tempo (to set playback of the recorded tracks to a tem- po that is easy for you to follow)

4.Press the START/STOP button to start recording.

•At this time, the contents of any tracks that are al- ready recorded start to play back.

•Optional pedal operation you perform is also record- ed.

5. Use the keyboard to play what you want to record the track you selected.

6. Press the START/STOP button to end recording when you are finished.

Track Contents After Real-time Recording

In addition to keyboard notes, the following data is also recorded to the selected track during real-time recording. This data is applied whenever the track is played back.

•Tone number

•Optional pedal operations

❚NOTE

•Starting a record operation also records the Mixer settings for the other tracks to the song header.

To record to Tracks 2 through 6 using step

recording

This procedure describes how to input notes one-by-one, specifying each note’s pitch and length.

1. Press the SONG MEMORY button three times to enter real-time record standby, and then use the

[+]and [–]buttons to select a song number (0/

1).

•The song number you select should be the one where you previously input Track 1.

S t e p R e c

E-52

703A-E-054A