IMPORTANT!

•For Normal Speed CS, adjustment of exposure, white balance, and Auto Focus is performed for each CS image when the camera is configured with settings shown below.

Exposure Mode

Auto, A (Aperture Priority) mode, S (Shutter Speed Priority)

mode

White Balance

Auto WB

Focus

Q Auto Focus, ´ Macro

 

 

•For Normal Speed CS, the ISO sensitivity, exposure, and shutter speed values that appear on the monitor screen when you half-press the shutter button indicate the values for the first CS image. Values for subsequent images are not displayed.

•You also can select a flash mode for Normal Speed CS shooting. When using the flash, the CS interval will be affected by the time it takes for the flash to charge.

•Combining Normal Speed CS images into a CS group (page 109) manually on the playback screen is not supported.

•You cannot specify the number of images shot per second (fps) with Normal Speed CS.

•The number of images per second (fps) of Normal Speed CS varies slightly depending on the type of memory card you are using and its current condition (remaining capacity, fragmentation state, etc.).

•You cannot use Normal Speed CS in combination with Prerecord CS.

•“O Tracking” is not supported for the AF Area setting (page 96) while Normal Speed CS is enabled. If you select “O Tracking” while Normal Speed CS is enabled, the camera will automatically apply the “U Spot” AF Area setting.

•When shooting with Normal Speed CS in combination with the Self-timer when it is set to “2 sec” or “10 sec”, once CS shooting starts it will continue until you press the shutter button or until there is no more memory available to store images.

B

50

Snapshot Tutorial