To replace the battery

Stopper

1.Open the battery cover and

remove the current battery.

2. Load a new battery.

Charge the Battery

You can use either of the two following methods to charge the camera’s battery.

•USB-AC adaptor

•USB connection to a computer

.To charge with the USB-AC adaptor

The adaptor lets you charge the battery while it is loaded in the camera.

While the camera is turned off, connect in the sequence shown below (1, 2, 3,

4).

Charging time: Approximately 120 minutes

Power cord

 

2

3

4

 

 

 

1

[USB/AV] port

USB-AC adaptor

 

USB cable

 

 

 

 

 

(included with camera)

 

 

Making sure that the mark on the USB cable connector is towards the monitor screen side, connect the cable to the camera.

14

Quick Start Basics