IMPORTANT!• Make sure that you insert the cable connector into the USB/ AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
•Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in
the illustration.
Back Lamp Operation| Lamp Status | Description | Back lamp |
| ||
Lit Red | Charging |
|
| Abnormal ambient temperature, USB- |
|
Flashing Red | AC adaptor problem, or battery |
|
| problem (page 113) |
|
Off | Charging complete |
|
USB connection lets you |
|
| Computer |
|
charge the battery while it is |
|
| (power turned on) | |
loaded in the camera. |
|
|
|
|
While the camera is turned off, |
|
|
|
|
connect in the sequence |
|
|
|
|
shown below (1, 2). If the |
|
|
|
|
camera is on, press [ON/OFF] |
|
| USB port | USB |
(Power) to turn it off before |
|
|
| |
|
|
|
| |
connecting it to your computer. |
|
|
|
|
Charging time: Approximately |
| [USB/AV] port | 2 |
|
140 minutes | 1 |
| ||
|
|
| ||
|
| USB cable |
|
|
|
| (included with camera) |
| |
| Making sure that the mark on the USB cable |
| ||
| connector is towards the monitor screen side, connect | |||
| the cable to the camera. |
|
| |
15 | Quick Start Basics |
|